A Fender Stratocaster is a versatile guitar that can be used for a variety of genres, from country to metal. While the body shape and pickups stay the same, the pots (or potentiometers) can be swapped out to change the sound of the guitar. In this blog post, we’ll explore the best pots for a Stratocaster and how they can affect your tone.
Guide
Best pots for stratocaster : A complete buying guide
If you’re looking for the perfect pots for your Stratocaster, you’ve come to the right place. In this blog post, we’ll give you a complete buying guide for the best Stratocaster pots. When it comes to picking the best pots for your Stratocaster, there are a few things to keep in mind. First and foremost, make sure that the pot has a low noise level. This is important because you don’t want your sound to be muffled or distorted.
Second, make sure that the pot has a good range of sensitivity so that you can get the perfect sound out of your guitar. And finally, make sure that the pot has a good response time so that it responds quickly to your guitar’s strings. Below are some of our favorite Stratocaster pots: 1. Fender Deluxe Slanted Rectangle Pot (PS2) This pot is designed specifically for use with Stratocasters and features a low noise level and good range of sensitivity. It also has a fast response time so that it responds quickly to your guitar’s strings. Overall, this is one of the best Stratocaster pots on the market today. 2.
What is pots for stratocaster?
What is a Stratocaster guitar? A Stratocaster guitar is a guitar designed by Leo Fender in the early 1950s. It has a ”bolt-on” neck, which means that the neck is attached to the body of the guitar with screws. The Stratocaster was Fender’s first electric guitar and quickly became popular for its tonal versatility and ease of use.
Why should you buy a good pots for stratocaster?
If you play the electric guitar, you know that a good quality pots can make all the difference when it comes to getting that perfect tone. There are a lot of different types of pots out there, so it can be hard to decide which one is right for you. In this blog, we’ll discuss some of the reasons why you should buy a good pots for your stratocaster. First and foremost, a good pots will make your sound much more consistent. If you have a bad pot, your signal will be affected by its location and quality dramatically.
This means that you’ll have to adjust your playing technique constantly in order to get the same tone from your guitar. A good pot, on the other hand, will give you a consistently great tone no matter where it is placed on your instrument. Second, buying a good pot will also help improve your guitar’s overall performance. Pots are responsible for regulating the flow of electricity through your strings, and if they’re not well made, this can lead to problems with your strings breaking or sounding brittle.
Different types of pots for stratocaster
There are many different types of pots for a stratocaster, from the classic Fender/Gretsch style to the more modern designs. Here are four of the most popular types of pots: 1. The Fender/Gretsch style pot is the classic type and comes in both metal and plastic versions. It’s usually mounted on the bridge and provides tone control for the middle and high frequencies.
2. The Jimi Hendrix style pot is also known as a ”wah-wah” pot because it produces a sweeping effect when activated.It’s usually mounted on the neck or behind the pickguard and is used to modify tones, often for solos or lead parts. 3. The Keith Richards style pot is a small, round pot that’s used to provide a lot of control over distortion and overdrive sounds. It’s usually mounted on the headstock or on an arm that extends out from behind the guitar body. 4. The Robert Johnson style pot is similar to Keith Richards’ pot but is taller and narrower.
Features to consider when buying a pots for stratocaster
When it comes to buying a pots for a stratocaster, there are a few features that you should consider. These include the material the pot is made of, the size of the pot, and the type of pot. One important factor to consider when buying a pots for a stratocaster is the material it is made of. Strats typically use metal pots, so it’s important to choose one that will withstand heavy use and won’t rust over time.
Another consideration is size. There are different sizes available, so it’s important to find one that will fit comfortably on your guitar and not take up too much space. Finally, consider the type of pot you’re looking for.
How to choose the right pots for stratocaster?
When choosing the right pots for a Stratocaster, it is important to take into account the type of guitar the pot is meant for, as well as its size and shape. For instance, a metal pot meant for a Stratocaster will be thicker and heavier than a plastic pot designed for a Jazzmaster or Telecaster. Additionally, Stratocaster-specific pots come in several different shapes and sizes, so it’s important to choose one that fit your instrument perfectly. Finally, it’s important to keep in mind the price of pots. While there are some expensive pots on the market, there are also affordable options that will work just as well.
Do you need a pots for stratocaster & Why?
Some people might argue that a guitar doesn’t really need pots for stratocaster. After all, a Stratocaster is essentially a electric guitar with four single coil pickups, right? Well, that’s true – but a Stratocaster can still benefit from pots. Pots are used on guitars to control the volume and tone of the guitar. Volume can be increased by turning up the pot, while tone can be adjusted by turning down the pot. This is especially helpful if you want to change the sound of your Stratocaster from metal to jazz, or vice versa. If you’re not sure whether or not you need pots for your Stratocaster, it’s best to get them installed by a professional.
10 Best pots for stratocaster in 2023: According to Reviews.
This is a pre-wired Circuit Wiring for the Squier Stratocaster electric guitar. This wiring harness includes 1 volume and 2 tone knobs, 2 capacitors, 1 output jack socket, and 1 Volume and 2 Tone Potentiometers. The wiring diagram is shown in the picture seventh shown. All you need to do is solder your pickups to the switch and ground them to the volume pots.
- 1 Volume and 2 Tone Knob Pots: Two A500k potentiometer, 1 B500k potentiometer
- Pots Shaft length: approx
- All you need to do is solder your pickups to the switch and ground them to the volume pots.(1 colored wire from 1 pickup to any of the connectors on the neck side of the switch ( depending on where you want it) and the other wire from that pickup gets grounded.)
- 16mm / 0.63″, Switch: Approx
- Circuit wiring set for SSS SSH style Fender Squier Stratocaster electric guitar, material: metal and wire, switch cap: Black
- Wiring diagram as the picture seventh shown, this harness is completely prewired
- Wiring harness: 1 volume / 2 tones / 5 way switch, 2 capacitors, 1 output jack socket
- 18mm / 0.71″, Base diameter: approx
- 52 x 48 x 12mm / 2.04 x 1.89 x 0.47 inch
If you’re looking for a quality Strat pot set, look no further than CTS pots! These pots are designed specifically for Strat-style guitars and provide all three necessary pots for wiring your guitar – making them the perfect choice for anyone looking to get their guitar set up the way they want it. Additionally, the 1/4″ threaded bushing length is optimized for use with pickguards – so you can be sure that these pots will fit your particular guitar perfectly. And, of course, included are mounting hardware so that you can quickly and easily install them on your instrument.
- The finest parts for your Strat!
- 250k audio-taper, 10% tolerance
- CTS pots, as used by Fender for decades
- Mounting hardware included: lockwasher (use internally), flat washer (use externally), and nut.
- Pots will not work in rear-routed guitars.
- Provides all three pots needed to wire a Strat, so you’ll have what you need.
- Fits most Strat-style guitars, however, non-Fender pickguards may require slight enlargement of the mounting holes
- 1/4″ threaded bushing length is optimized for pickguard mounting
- These CTS pots have a 3/8″ diameter bushing, this is the hole diameter needed for mounting.
The ToneShapers Professional Wiring Kit for Stratocasters is the highest-quality wiring diagram in the industry. It features professional-grade component brands and includes all the hardware you need to install your new wiring configuration. The ToneShapers Professional Wiring Kit is perfect for modern Stratocaster players who want the best possible tone quality.
- The finest OEM component brands, no generic part specs – the RIGHT parts for your application
- Professional wiring diagram – the highest-quality documentation in the industry
- For SSS Stratocasters; Modern wiring configures the tone controls like an American-Series Strat
- All hardware included, and it’s the right hardware – you’ll have everything you need
- Nobody knows more about guitar wiring than ToneShapers! We’ll help you build a better guitar.
This 5-way prewired blender kit with 3 Emerson Custom CTS 250k pots allows you to create delicious smoothies, soups, and sauces with ease. The 5-way switch allows for easy control over the blender’s speed and power, while the output jack provides convenient access to your blender’s juice or puree.
- 5-way Prewired Blender Kit with 3 Emerson Custom CTS 250k Pots
- Output Jack
- Capacit
- 5-way Switch
The CTS 450G Series 250K dish back short split shaft audio taper pots are handcrafted with a 10% tolerance and feature a 5-way blade switch with white switch tip, an orange drop .047uF/400v capacitor, and 4 ft. of Gavitt Vintage-correct push back wire.
- 4 Ft
- (1) Switchcraft J11 I/O Jack
- Gavitt Vintage-correct Push Back Wire (2 ft Black & 2 ft White)
- (3) CTS 450G Series 250K Dish Back Short Split Shaft Audio Taper Pots – 10% Tolerance
- (1) Orange Drop .047uF/400v Capacitor
- (1) Oak-Grigsby 5-way Blade Switch w/ White Switch Tip
Introducing the CTS Stratocaster wiring kit! This unique kit contains all three CTS pots needed to wire a Strat, giving you the tonal flexibility you need to create your own unique sound. The bushing diameter is optimized for use with pickguard mounting, and the included mounting hardware ensures a secure installation.
- Mounting hardware included: lockwasher (use internally), flat washer (use externally), and nut.
- 250k audio-taper, 10% tolerance
- The finest parts for your Strat!
- Pots will not work in rear-routed guitars
- Provides all three pots needed to wire a Strat, so you’ll have what you need.
- CTS pots, as used by Fender for decades
- Blender wiring allows you to combine the neck and bridge pickups, or have all three on simultaneously
- 1/4″ threaded bushing length is optimized for pickguard mounting
- These CTS pots have a 3/8″ diameter bushing, this is the hole diameter needed for mounting.
- Neither of these options is typically available on a Stratocaster, so this kit adds a lot of tonal flexibility!
- Fits most Strat-style guitars, however, non-Fender pickguards may require slight enlargement of the mounting holes
CTS 450 series pots are precision-engineered for optimal guitar performance. Enhanced Durability: The high-quality brass bushing and shaft ensures longevity and reliable operation. Effortless Installation: All mounting hardware is included, making installation a breeze. Superior Tone Control: Includes a high-grade USA-made 0.047uF/400V Polypropylene Capacitor for improved tonal shaping. Trusted Industry Standard: Genuine CTS pots with a low torque design and 250k 10% audio-taper offer the same high quality used by top American guitar companies, guaranteeing unmatched volume control and iconic Strat-style functionality.
- Enhanced Durability: The high-quality brass bushing and shaft ensures longevity and reliable operation.
- Trusted Industry Standard: Genuine CTS pots with a low torque design and 250k 10% audio-taper offer the same high quality used by top American guitar companies, guaranteeing unmatched volume control and iconic Strat-style functionality.
- Effortless Installation: All mounting hardware is included, making installation a breeze.
- Tailored for Guitars: CTS 450 series pots are precision-engineered for optimal guitar performance.
- Superior Tone Control: Includes a high-grade USA-made 0.047uF/400V Polypropylene Capacitor for improved tonal shaping.
ToneShapers is the only source for genuine guitar wiring diagrams that are of the highest quality. We offer professional wiring diagrams that will help you build a better guitar. Our diagrams are designed to meet the specific needs of Stratocaster players.
- For SSS Stratocasters; Blender wiring allows neck/bridge combinations not available conventionally
- The finest OEM component brands, no generic part specs – the RIGHT parts for your application
- Nobody knows more about guitar wiring than ToneShapers! We’ll help you build a better guitar.
- All hardware included, and it’s the right hardware – you’ll have everything you need
- Professional wiring diagram – the highest-quality documentation in the industry
This Strat wiring harness is a great way to get your Strat sounds exactly the way you want them. You get two A500k pickups and one B500k pickup, all wired to a 5-way switch. The wiring is pre-made, so all you have to do is solder your pickups to the switch and ground them to the volume pot. This makes it easy to get great sounds without having to worry about any wiring complications.
- Strat Wiring Harness One Volume/Two Tones/5 way switch
- 2 x A500k,1 x B500k Pots with 18mm Shafts/Base Dia: 16mm .047 capacitors
- This harness is completely prewired
- All you need to do is solder your pickups to the switch and ground them to the volume pot.
This is a potentiometer that fits Stratocaster and Les Paul 6mm knobs. It has 500k ohm resistance and an audio taper. It has a shaft length of 15mm and a shaft diameter of 6mm. It is full size and has a whole length of 29mm. The base diameter is 23mm.
- Full Resistance: 500k ohm;Audio Taper
- Shaft Length: 15mm Shaft Diameter: 6mm
- Full size;Whole Length: 29Mm
- Package Includes: 2 pcs A500K Potentiometers
- Fits Stratocaster and Les Paul 6mm knobs,should also fits other 6mm knobs as well.Ideal for electric guitar or bass building.
- Base Diameter: 23Mm.
Best pots for stratocaster brands
Upgrading control pots: choosing the right pots and knobs
Verdict
Stratocaster guitars are some of the most popular instruments in the world, and for good reason. They’re versatile, easy to play and well-made. That said, there are a lot of different Stratocaster models on the market, so it can be hard to decide which one is right for you. In this article, we’ll take a look at 10 of the best Stratocaster pots available in 2023. 1.
GFS Bigsby tremolo bridge Lone Star Edition The GFS Bigsby tremolo bridge is one of the best Stratocaster pots available today. It features a high-quality construction and reliable performance, making it perfect for anyone who wants to add a little extra firepower to their guitar sound. Plus, its sleek design will complement any guitar setup perfectly. 2.
Fender Standard Tremolo Bridge (Black) If you’re looking for a affordable Stratocaster pot that offers great performance, the Fender Standard Tremolo Bridge is definitely worth considering. It’s made from durable materials and has a smooth operation that will make tuning your guitar much easier. 3. Dunlop 595JT Jumbo Fretted String Lightening Pickup Strings (10.
