Surprising Hack: Cleaning Your Jetted Tub with Dawn Soap

Yes, you can use Dawn to clean a jetted tub. In fact, Dawn dishwashing liquid is an excellent option for cleaning a tub with jets, as it effectively removes soap scum, dirt, and grime from the tub’s surface. Here’s a step-by-step guide on using Dawn to clean a jetted tub:
  • Begin by filling the tub with hot water until all the jets are completely covered.
  • Add two tablespoons of Dawn dishwashing liquid to the water.
  • Add half a cup of bleach or vinegar to the water to clean the tub and disinfect the jets.
  • Turn on the water jets and run them for about 10 minutes, allowing the Dawn and bleach or vinegar to circulate through the water.
  • Drain the tub and refill it with cold water. Run the jets again for another 5 minutes to rinse out any remaining soap, dirt, or bleach residue.
  • Finally, drain the tub and wipe it down with a clean cloth to remove any excess water or residue.
  • Using Dawn and bleach or vinegar is an excellent option for cleaning a jetted tub because it’s a safe, affordable, and effective way to get your tub looking and feeling clean and fresh. So, next time when you want to clean your jetted tub, try this quick and easy method to get the job done in a few simple steps.
    Interesting Read  What Causes Pink Stuff on Tub Jets?

    The importance of cleaning a jetted tub

    If you own a jetted tub, you know how relaxing it can be to soak in its soothing water jets after a long day. However, what you may not realize is that these jets can accumulate bacteria, mold, mildew, and other harmful substances over time if not properly cleaned. Ignoring the maintenance of your jetted tub not only affects your experience, but it can also pose a health risk. That is why it is important to make cleaning your jetted tub a priority. In this article, we’ll share a step-by-step guide to help you clean your tub at home without any hassle.

    How to properly fill a jetted tub with hot water

    Before starting the cleaning process, first ensure that your jetted tub is properly filled with hot water. You need to fill the tub completely until all of the tub’s jets are covered with water. While you may not think this is important, it is crucial to ensure that all the jets are cleaned properly.

    Adding dishwashing liquid to clean a jetted tub

    After filling the tub with hot water, add a good amount of dishwashing liquid. Dishwashing liquid is an excellent cleaner that can help remove grease, grime, and other dirt buildup. When using dishwashing liquid, make sure to add about 2 tablespoons to the water. This will help break down any buildup that has accumulated in the jets over time.
    • Fill the jetted tub with hot water completely
    • Add 2 tablespoons of dishwashing liquid to the water

    The benefits of adding bleach or vinegar to clean a jetted tub

    While dishwashing liquid is effective in cleaning your jetted tub, combining it with bleach or vinegar can help give it an extra boost. Bleach or vinegar can help remove any stubborn bacteria, mold, or mildew buildup in the jets. If you choose to use bleach, make sure to add 1/2 cup of it to the water after adding the dishwashing liquid. If you choose vinegar, add 1/2 cup of it instead of bleach. Make sure not to mix bleach and vinegar together as this can be dangerous.
    Interesting Read  Transform Your Jetted Tub with Baking Soda: A Cleaning Hack!
    Note: Adding bleach or vinegar should never be done when there are bathers in the tub as it can be dangerous and harmful to their health.

    Activating the water jets to clean a jetted tub effectively

    After adding the cleaning solution, turn on the jet function to run for about 10 minutes. This helps to circulate the water and cleaning solution through the jets to remove any buildup that may be lurking inside. You can adjust the speed of the jets according to your preference. If you feel that some jets are not getting enough water flow, move the water with your hand to where it is needed most.

    Draining a jetted tub after cleaning

    Once you are satisfied that your jetted tub is clean, it’s time to drain and rinse it off. Drain the tub completely and then proceed to rinse it with warm water. Make sure to rinse thoroughly to remove any remnants of cleaning solution. After rinsing, your jetted tub will be cleaner and ready for use at any time. In conclusion, cleaning your jetted tub is a simple process that should be done regularly to avoid bacteria, mold, and mildew buildup. By following the steps outlined in this article, you can ensure that your jetted tub is properly cleaned and maintained for years of relaxation and enjoyment.

    Previous Article

    Is Airbnb hosting a profitable side hustle?

    Next Article

    Why Southern Homes Feature Two Front Doors: Uncovering the Fascinating Origin

    Related Posts